Better maintenance and maintenance for cast iron pots

As we all know, speaking of cast iron pot, in addition to its various advantages, there will be some disadvantages: such as relatively large weight, easy to rust and so on. Compared with its advantages, these shortcomings are not a big problem, as long as we pay a little attention to some late maintenance and maintenance, you can rest assured.

Cleaning the new pot

(1) Put the water in the cast iron pot, pour the water after boiling, and then small fire hot cast iron pot, take a piece of fat pork carefully wipe the cast iron pot.

(2) After a complete wipe of the cast iron pot, pour out the oil stains, cool, clean and repeat several times. If the final oil stains are very clean, it means that the pot can begin to use. 

wps_doc_0

How to Use the cast iron pot

Step 1: Prepare a piece of fat pork, must be more fat, so that the oil is more. The effect is better.

Step 2: Roughly flush the pot, then boil a pot of hot water, use a brush to clean the pot, brush the pot body, and brush all kinds of floating things on the surface.

Step 3: Put the pot on the stove, turn on a small heat, and slowly dry the water droplets on the pot body.

Step 4: Put the fat meat into the pot and turn it a few times. Then grab the pork with your chopsticks and smear every inch of the pan. Carefully and carefully, let the oil slowly percolate into the iron pot.

Step 5: When the meat becomes black and scorched, and the oil in the pan becomes black, take it out and then clean it with water.

Step 6: Repeat steps 3, 4, 5 again, repeat about 3 times, when the pork is no longer black, it is successful. So you can put the meat in batches, or you can cut off the last hard surface of the pork and use the inside.

Step 7: Wash the cast iron pot with clean water, dry the pot body, we can put a layer of vegetable oil on the surface, so that our pot is successful

To maintain the cast iron pot

wps_doc_1

Step 1: Take a cast iron pot, dip a cloth into water and a little dish soap, and wash the pot inside and out, then rinse the pot with water.

Step 2: Wipe the pot clean with kitchen paper, put it on the stove and dry it over low heat. 

Step 3: Prepare a few pieces of fat pork, use tongs or chopsticks to hold the fat pork, turn on a low heat, and wipe the edge of the pot with the pork. Make sure you do it multiple times, every corner. 

Step 4: Heat a cast iron wok slowly, then drizzle the oil around the edges with a small spoon. This action is repeated several times to ensure that the inner wall of the pot has been soaked in oil. 

Step 5: Pour off the oil in the pan, leaving a piece of fat, and wipe the outside of the pan carefully. 

Step 6: Wait for the pot to cool down, and scrub repeatedly it with warm water after it is completely cooled. 

Step 7: Repeat the above steps 2 to 6 for 3 times, and leave the oil in the pot overnight after the last wipe

Do the Washing

Once you cook in a pan (or if you just bought it), clean the pan with warm, slightly soapy water and a sponge. If you have some stubborn, charred debris, use the back of a sponge to scrape it off. If that doesn’t work, pour a few tablespoons of canola or vegetable oil into the pan, add a few tablespoons of kosher salt, and scrub the pan with paper towels. Salt is abrasive enough to remove stubborn food scraps, but not so hard that it damages the seasoning. After removing everything, rinse the pot with warm water and wash gently.

Dry thoroughly

Water is the worst enemy of cast iron, so be sure to dry the entire pot (not just the inside) thoroughly after cleaning. If left on top, the water can cause the pot to rust, so it must be wiped down with a rag or paper towel. To really make sure it’s dry, place the pan over a high heat to ensure evaporation.

Season with oil and heat 

Cool and store the pot 

Once the cast iron pot has cooled, you can store it on the kitchen counter or stove, or you can store it in a cabinet. If you are stacking cast iron with other POTS and pans, place a paper towel inside the pot to protect the surface and remove moisture. 

Of course, when we usually use cast iron pot, we try not to cook some strong acid or strong alkaline food: such as bayberry and mung bean, lest they and the surface of the cast iron pot chemical reaction, corrosion of the cast iron pot. It is easy to destroy the antirust coating of the cast iron pot and reduce its service life.


Post time: Jun-02-2023